NeuBoat Dock Installation Instructions
Let’s Go!
How to navigate this document
Legal notices
Important information
Safety warnings
System requirements of use
System limitations
Product installation and operation
Switch off power supply
Ensure system power source is charged by vessel's engine under normal operation
Potential ignition source
Entrapment hazard
Product warnings
Product grounding
Positive ground systems
Power supply voltage
Corrosion
Power supply protection
Service and maintenance
Regulatory notices
Cleaning the camera
Disclaimer
Open source license agreements
EMC installation guidelines
Suppression ferrites
Declaration of Conformity
PSTI Compliance
Warranty policy and registration
Product disposal
IMO and SOLAS
Technical accuracy
Publication copyright
Document information
Applicable products
Product documentation
Document illustrations
Document conventions
Software updates
Software updates
Installing software updates
Removing MicroSD card from its adapter
Inserting a MicroSD card — Camera Conversion Unit
Inserting a MicroSD card — Object Recognition Unit
Product and system overview
Product overview
Required additional components
Multifunction display requirement
Maximum camera cable length
Network cable extensions
Basic system
Expanded system
Parts supplied
SVM camera — parts supplied
CCU — parts supplied
ORU — parts supplied
Product dimensions
SVM camera — dimensions
CCU — dimensions
ORU — dimensions
Location requirements
Warnings and cautions
Switch off power supply
Potential ignition source
Entrapment hazard
Maximum camera cable length
SVM camera — placement position file
General location requirements
SVM camera — location requirements
CCU and ORU — location requirements
Compass safe distance
EMC installation guidelines
Cables and connections — General information
General cabling guidance
Cable types and length
Cable routing and bend radius
Strain relief
Cable shielding
Suppression ferrites
Connecting cables
Bare-ended wire connections
Positive ground systems
SVM camera — connections overview
SVM camera — input channels
CCU — connections overview
ORU — connections overview
Mounting
Tools required
Fixing screw suitability
2–person installation required
SVM camera — preparing the mounting surface
SVM camera — mounting
Marine-grade sealant
CCU — mounting
ORU — mounting
Network connections
Maximum camera cable length
Basic system
Expanded system
Network cable extensions
Power connections — SVM camera
SVM camera — power connection
Ensure system power source is charged by vessel's engine under normal operation
Power connections — Camera Conversion Unit (CCU)
CCU — power connection
Inline fuse requirement
Inline fuse and thermal breaker ratings
Ensure system power source is charged by vessel's engine under normal operation
Grounding not required
CCU — power distribution
Power cable extension (12 / 24 V systems)
Power connections — Object Recognition Unit (ORU)
ORU — power connection
Inline fuse requirement
Inline fuse and thermal breaker ratings
Ensure system power source is charged by vessel's engine under normal operation
Product grounding
ORU — power distribution
Power cable extension (12 / 24 V systems)
Power cable ground wire connection
Calibration and operation
NeuBoat Dock system calibration
NeuBoat Dock operation instructions
Troubleshooting
Troubleshooting
LED diagnostic guidance
LED diagnostics — CCU
LED diagnostics — ORU
Camera troubleshooting
Power up troubleshooting
System data troubleshooting
Miscellaneous troubleshooting
Alarms list
Acknowledging alarms
Maintenance
Routine equipment checks
Cleaning the camera
Technical support
Raymarine technical support and servicing
Diagnostic product information
Learning resources
Technical specification
Technical specification — SVM camera
Technical Specification — CCU
Technical Specification — ORU
Spares and accessories
Spares
Accessories
RayNet to RayNet cables and connectors
RayNet to RJ45, and RJ45 (SeaTalk HS) adapter cables
