Troubleshooting ContentsTroubleshootingLED diagnostic guidanceYour product has diagnostic LEDs which can be used to identify the unit’s status and to help troubleshoot any potential issues that may occur.LED diagnostics — CCUThe Camera Conversion Unit (CCU) has 4 diagnostic LEDs located at the top of the unit. These LEDs are used to identify the unit’s status.LED diagnostics — ORUThe Object Recognition Unit (ORU) has a single diagnostic LED located at the bottom of the unit. This LED is used to identify the unit’s power status.Camera troubleshootingWhen a camera fault is present, the relevant camera streams will be flagged via the multifunction display’s NeuBoat Dock app, with warning icons indicating where the fault has been detected.Power up troubleshootingBefore troubleshooting problems with your power connection, ensure that you have followed the power connection guidance provided in the product’s installation instructions and performed a power cycle/reboot of the device. The troubleshooting information below can be used if you are experiencing problems with powering up your product.System data troubleshootingTroubleshooting assistance with typical causes of system data issues, and their solutions.Miscellaneous troubleshootingMiscellaneous problems and their possible causes and solutions are described here.Alarms listPrevious topic: Calibration and operationNext topic: Maintenance