Alarms manager ContentsAlarms managerThe alarms manager is used to configure available alarm’s settings, view details of currently active alarms and provides an alarms history.Alarm and information notificationsAlarms, warnings and information notifications are used to notify you to a situation or hazard that requires your attention. Notifications are triggered by system functions and external devices connected to the MFD (multifunction display). Alarm and warning notifications are displayed on all networked MFDs.Active alarm indicationWhen alarms are active the homescreen Alarms icon will identify the number of active alarms in the top right corner. The Home icon in app pages can also be configured to provide an active alarm indicator.Alarm and notification sourcesThe display can show alarms and notifications from various sources.Alarm settingsThe alarms listed below can be enabled and disabled and where applicable alarm threshold values can be adjusted. Certain alarms may require specific connected peripheral devices or configurations. External alarm speaker / buzzerIf your MFD has a built-in buzzer or is connected to a wired external buzzer, MFD alarms will trigger an audible tone. If you connect your MFD to a Bluetooth speaker then the alarm tone can also be heard from the speaker.Acknowledging alarmsFollow the steps below to acknowledge an active alarm.YachtSense Link router alarmsIf your system includes a YachtSense™ Link router then you can enable and disable the router’s alarms (alert notifications) from the alarms manager.Digital switching alarmsWhen your MFD is connected and configured with a supported digital switching system, digital switching specific alarms can be enabled and disabled using the alarms manager.Man Overboard (MOB)If a person or object falls overboard, you can use the Man Overboard (MOB) alarm to mark the position that your vessel was at when the MOB alarm was activated.DSC distress notificationThe MFD can display DSC distress alert information received by a connected DSC VHF radio.High Speed AlarmA High speed alarm is available which will trigger a warning alarm when the reported SOG (Speed Over Ground) exceeds the specified threshold. The High speed alarm uses SOG reported by a connected GNSS (GPS) receiver.Previous topic: SettingsNext topic: Engine integration & autopilot control