Settings ContentsHomescreen settings menusThe display’s settings are accessed by selecting the Settings icon located at the bottom of the Homescreen.Getting started settings menuThe Getting started settings menu is the first menu displayed when the Homescreen Settings icon is selected. Getting started settings menu includes options for initial setup of the display.Boat details settings menuThe Boat details settings menu enables you to configure specific characteristics for your vessel. Configuring these settings helps to ensure correct operation and display of vessel data.Units settings menuThe Units settings menu is used to specify your preferred units of measure for data readings. The Units menu can be accessed from the Homescreen: Homescreen > Settings > Units, or from the Dashboard app: Menu > Settings > Units.This display settings menuThe This display settings menu provides configuration settings specific to your display. Autopilot settings menuThe Autopilot settings menu is available when a compatible Raymarine or Mercury® autopilot is detected. The Autopilot settings menu provides settings to configure the display so that it can be used to control a compatible autopilot. The settings available are dependent on the configured Vessel hull type in the Pilot set-up settings menu.Network settings menuThe Network settings menu provides network related information and settings for products connected to the same Ethernet (RayNet) network and SeaTalk NG/NMEA 2000 network as the chartplotter. The Network settings menu also provides access to diagnostic, troubleshooting and configuration settings.Responder settingsThe Responder settings menu is only available when First responder has been selected as the Boating activity during step 2 of the display’s initial startup wizard. The Responder settings menu includes settings for STEDS specific features, which require an AIS5000 to be connected to the system. If the system does not detect an AIS5000 these features will not be available.Previous topic: HomescreenNext topic: Alarms manager