Installation ContentsTools requiredThe following tools are required for installation.Mast cable routingWhen routing the cable inside the mast, the mast cable exit can be located under the mounting plate (the mounting plates includes a cable recess for this purpose) or on the side of the mast.Mast cable drip loopMoisture in the environment may cause water droplets to form and run down the supplied mast cable. Mounting the wind transducerProcedure for mounting the wind transducer.Mounting the gatewayProcedure for mounting the gateway. Alternatively, the gateway can be secured in a suitable location using cable ties.Previous topic: Location requirementsNext topic: Cables and connections — General information