Network connections ContentsElement HV transducer connectionHV-series transducers can be connected directly to Element™ HV displays.Element HV legacy transducer connectionWhen connecting a legacy transducer you must use the correct adaptor cable and, where required an extension cable that is compatible with the legacy transducer.Element S transducer connectionConical high CHIRP sonar transducers can be connected directly to Element™ S variant displays.SeaTalkng connectionThe display can be connected to a SeaTalkng® backbone, using the DeviceNet connector included in the Power/NMEA 2000 cable and an adaptor cable (not supplied).SeaTalkng system exampleAn example SeaTalkng® system is provided below. Connection to a network provides the display with data from other connected devices.Pairing a Quantum-Series Radar scannerYou can connect a Quantum-Series Radar scanner to your display using the Wi-Fi connection.Element autopilot connectionYou can connect an Element™ display to the same network as an Evolution™ autopilot system.Previous topic: Cables and connections — General informationNext topic: Power connections