Mounting (surface cable routing) ContentsPreparing the mounting surface (surface cable routing)The mounting surface must be prepared correctly for surface cable routing.Mounting gasket installation (surface cable routing)In installations where the cabling is routed on the mounting surface the camera cable must pass through the cable feed hole and out of the exit channel..Mounting the unit (surface cable routing)Procedure for mounting the camera base for installations using surface cable routing.Attaching the collarThe collar is used to secure the camera ball to the camera\ base.Adjusting the camera viewThe camera viewing angle can be adjusted.Previous topic: CAM400 Installation & Operation InstructionsNext topic: Let’s Go!Parent topic: InstallationPrevious topic: Mounting (through-surface cable routing)