Sidebar selector

Selecting an icon from the sidebar selector will display that sidebar.

SidebarSelectorThe following sidebars are available:

Icon

Description

SidebarData 1Data 1 — The Data 1 sidebar is a default sidebar that is always available. The default data items are:

  • Vessel position (Lat/Lon)

  • COG (Course Over ground)

  • SOG (Speed Over ground)

  • BTW (Bearing To Waypoint)

  • DTW (Distance To Waypoint)

  • Rudder bar (rudder position)

The data items can be customized.

SidebarData 2Data 2 — The Data 2 sidebar is a default sidebar that is always available. The default data items are:

  • Active waypoint (Waypoint name)

  • Wpt TTG (Waypoint Time To Go)

  • Wpt ETA (Waypoint Estimated Time of Arrival)

  • BTW (Bearing To Waypoint)

  • DTW (Distance To Waypoint)

  • Rudder bar (rudder position)

The data items can be customized.

Sidebar Alpha displayAlpha display — The Alpha display sidebar is available when 1 or more Alpha series performance displays are on the network. The sidebar enables control of Alpha series performance displays. The following controls are available:

  • Display — When more than 1 Alpha display is connected you can select which display to control.

  • Page — Use the arrow buttons to cycle though the selected display’s pages.

  • Brightness — Use the buttons to adjust the selected display’s brightness level.

SidebarPower-poleShallow anchorPower-Pole® — The Power-Pole® shallow anchor sidebar is available when a compatible shallow anchor is detected.

For details of the options available refer to: Anchor control overview

The controls cannot be customized.

SidebarRace startRace start — The Race start sidebar is available when a sailing activity is chosen during the MFD’s initial startup wizard.

For details of the controls available refer to: Race sidebar

The displayed data and options cannot be customized.

SidebarPilotPilot — The Pilot sidebar is available when the MFD has Pilot control enabled. Refer to: Autopilot control

The displayed data and options cannot be customized.

SidebarSearchSearch — The Search sidebar is a default sidebar that is always available. The sidebar provides data and options relevant for following SAR (Search And Rescue) patterns. The available data items are:

  • Brg to CSP (Bearing to Commence Search Point)

  • Leg 1

  • Leg 2

  • Target SOG

  • TTP (Time To Perpendicular) — This is the time (based on current speed) for the vessel to either reach the waypoint's arrival circle or if aiming outside the arrival circle, for the vessel to pass perpendicular to the waypoint, with respect to the current track leg.

  • COG (Course Over ground)

  • Advance wpt

  • XTE (Cross track error)

  • SOG (Speed Over ground)

  • Stop Route

  • Rudder bar (rudder position)

The data items cannot be customized

Note

Brg to CSP, Leg 1 and leg 2 will update as your route progresses to show current leg and subsequent 2 legs.

SidebarTrollingTrolling — The Trolling sidebar is available when a compatible Trolling motor is detected.

For details of the options available refer to: Trolling motor control

The controls cannot be customized.

SidebarMercuryMercury — The Mercury® sidebar is available when compatible Mercury® SmartCraft engines are detected.

For further details refer to: VesselView Sidebar

The displayed data cannot be customized.

SidebarAudioAudio — The Audio sidebar is available when compatible audio equipment is connected.

For details of the options available refer to: Audio sidebar

The displayed options cannot be customized.