Molex® connector connections ContentsMolex® connectorsThe YachtSense DCS-Series Digital Control System uses Molex® MX150 Industrial sealed connectors.Molex® connector types and keyingThe types of connectors used and their keying is shown belowRemoving connectors from modulesConnectors are supplied fitted to the modules, to remove the connector from the module follow the steps below.Removing seal plugsThe connector supplied with the Master module is supplied with seal plugs fitted to each of its 16 terminals. To wire the connector the relevant seal plugs will need to be removed. Follow the steps below to remove seal plugs from the connectors.Inserting seal plugsTo protect against water ingress, connector terminals that will not be wired require seal plugs (Molex® part number: 343450001) to be fitted.Wiring the connectorsFollow the instructions below to wire the connector terminals.Connecting Molex® connectors to modulesFollow the steps below to connect Molex® connectors to modules.Previous topic: Network connectionsNext topic: YachtSense DCS-Series app