Flush mounting ContentsTools required (flush mount installations)The following tools are recommended for flush mount installations:Rear access requirementsAccess to the rear of the display and mounting surface is required to surface and flush mount the display.Preparing the mounting surface — flush mountingWhen the display is flush mounted, the glass/bezel will be flush with the mounting surface. Flush mounting requires the same cutout hole as surface mounting, plus an additional rebate around the edge of the cutout to recess the display fully in the mounting surface.Breather holeThe chartplotter has a breather hole located on the bottom of the unit next to the product label.Flush mountingFollow the steps below to flush mount the display.Parent topic: InstallationPrevious topic: Trunnion mounting — Axiom 2 Pro 16Next topic: Surface mounting