Installation ContentsWarnings and cautionsTools requiredThe following tools are required to install your transducer.Pre-installation testTransducer cable routing guidanceGuidance for routing your transducer's cable is provided below.MountingTesting and adjusting the transducerAfter the initial installation has been carried out, the transducer should be tested and — if required — adjusted prior to finalizing the installation.Finalizing the transducer mountingAfter making any necessary adjustments to achieve optimum performance for your vessel, the transducer installation must be finalized by locking the transducer’s position.Anti-foulingWhere local regulations allow, it is recommended that you coat your transducer using a water-based anti-fouling paint. This will help prevent the build-up of organic growth, which can reduce transducer performance.Previous topic: Location requirementsNext topic: Cables and connections — General information