Settings ContentsSettings overviewYou can access the following advanced performance display settings and product information via the Settings menu: Data page view > Overlay menu > SettingsAuto-lock settingsYou can configure your performance display to activate Screen lock automatically after 10 seconds of touchscreen inactivity.Daytime color settingsBy default, your performance display is set to show a Light color scheme when the Color mode (Day) setting is in use. Alternatively, if preferred, this color scheme can be changed to a Dark mode.Display group settingsYou can synchronize the Brightness, Screen lock and Power-save mode settings between your performance display and other compatible devices on your network that are assigned to the same display group.Display orientation settingsFollowing a factory reset, your screen orientation will automatically change to Landscape or Portrait, based on your installation orientation.Standby image settingsYou can set a preset standby image or a custom standby image to display on the performance display’s screen once your boat has entered a stationary position.Alarm settingsAlarms are used to alert you to a danger, a hazard or a situation requiring your attention. Your performance display is capable of acting as a repeater for alarms raised by the multifunction display / chartplotter on your system. Once an alarm is triggered, the audio buzzer built into your performance display will sound.Backup and restore settingsPage configurations and system settings can be backed up to or restored from a MicroSD card inserted into a connected multifunction display / chartplotter’s card reader slot.Performing a factory resetIf you wish to restore your data pages to the default configuration, or, if you are experiencing problems with the Alpha Series performance display which cannot be resolved using the troubleshooting advice provided, you may need to perform a Factory reset.About this deviceIf you are experiencing issues with your device, the following product information may help to diagnose your problem.Language settingsBy default, the language displayed on your performance display is defined by the user interface language option selected on your chartplotter. The Select language setting can be accessed from the Getting started settings menu on your chartplotter: Homescreen > Settings > Getting started > Select language.Units of measurement settingsThe units of measurement displayed on your performance display is defined by the Units options selected on your chartplotter. The Units menu can be accessed from your chartplotters Units settings menu: Homescreen > Settings > Units.Previous topic: Operation via Raymarine multifunction displayNext topic: Troubleshooting