Radar settings

ChartRadar settingsThe following options are available:

• Radar selectionRadarSelection — When more than 1 Radar scanner is connected you can choose which Radar to use for the Radar layer in the Chart app.

• TransmitRadarTransmit — Start the Radar scanner transmitting or put it in Standby.

• Dual rangeRadar Dual range — Enables and disables dual range on compatible Radar scanners.

• ChannelRadarDual range channel — When Dual range is active, you can switch between channel 1 and 2.

• Sync radar range with chartChart / Radar Sync — Enables and disables the synchronization of Chart app range with all Radar app instances on the same app page.

  Note

  The current range is synchronized when the setting is enabled. Subsequent range changes in either the selected Chart app instance or any Radar app instance on the same app page will be synchronized.

• Show Radar overlayRadarOverlay — Enables and disables the Radar layer in the Chart app.

• VisibilityRadarOverlay visibility — Determines the percentage visibility (opacity) of the Radar layer.

• PaletteRadarOverlay color palette — The Radar overlay can be displayed in the following colors:

  • Full Color (256 colors)

  • Purple

  • Black

  • Red

  Note

  When ‘Full color’ is selected, approaching objects are displayed in Pink.

• Show sector blanking limitsRadarSector blanking — Enables and disables blank sectors on compatible radar scanners. For more information on blank sectors refer to Blank sectors

• DOPPLERDoppler — Enables and disables Doppler on compatible radar scanners. For more information on Doppler refer to Doppler Radar overview

  Note

  If ‘Full color’ is selected for the Radar overlay palette, approaching targets will appear Pink instead of Red.

• Use COG when no Heading data availableRadarOverlay without heading — Enables use of the Radar layer when Heading data is not available.

• RangeRadarRange — Determines the range used for the Radar layer.