Camera orientation

The camera can be mounted in 2 orientations informally known as “Ball up” (upright) and “Ball down” (upside down).

InstallationCamera orientation

Camera orientation

Camera orientationBall-up

Camera orientationBall-down

  • When the camera is mounted ball-up (upright), the camera is mounted on top of the mounting surface.

  • When the camera is mounted ball-down (upside down), the camera is mounted below the mounting surface.

The default video image orientation is for the ball-up (upright) configuration; if the camera is to be mounted in the ball-down (upside down) configuration, then the video image must be rotated. To rotate the video image, you must either:

  • Use the camera’s Web browser user interface to set the appropriate option. For further information, refer to the following section: Web browser interface

  • Or if supported, a compatible multifunction display H.264 camera / video application. For further information, refer to the following section: Compatible MFDs / chartplotters