Mounting preparation ContentsTools requiredThe following tools are required for installation:Camera orientationThe camera can be mounted in 2 orientations informally known as “Ball up” (upright) and “Ball down” (upside down).Routing cables through the riser's sidewallIdeally, the camera’s cables should be routed through a mounting surface cutout which is weather-tight and protected from water ingress, fouling and sun damage. However, if this is not possible, the cables can alternatively be routed through the riser’s sidewall. An optional 20 mm (0.79 in) wide, removable hatched area is provided on the riser for this purpose.Previous topic: Location requirementsNext topic: Mounting