Additional components

Additional components are available for the Axiom® 2 XL range, which, depending on your system, may be essential for certain features.

Note

  • Items 1, 2, 3 and 4 are available as an accessory pack (part number T70431).

  • AccessoriesMFD kitItems 1, 2 and 3 are included with the display when ordering Axiom® 2 XL MFD kits (part numbers: T70545, T70546, T70547 and T70548).

Additional components

  1. RCR-SD/USBRCR-SD/USB external card reader (A80440) — Axiom® 2 XL displays do not have a built-in card reader. The following functions require an external remote card reader to be connected to the display:

    • Use of electronic cartography. Alternatively, cartography can be shared from a networked display that has electronic cartography saved to internal storage, or has a card reader attached.

    • Updating product software. Alternatively, if your display has a connection to the Internet, you can check online for software updates.

    • Import and export user data (waypoints, routes and tracks). Alternatively, user data can be imported and exported from a networked display that does have a card reader attached.

    • Backup and restore settings. Alternatively, settings can be backed up and restored from a networked display that does have a card reader attached.

    • Viewing PDF files.

    • Capturing and viewing screenshots or images (.png, .jpg files).

    • Recording and viewing video files (.mov files).

    • Installation of third-party LightHouse app (.apk files) (for installation only; apps cannot be run directly from storage device).

    In addition to the storage uses listed above, the USB slot on the RCR-SDUSB can also supply 0.5 A of current to charge mobile devices.

  2. Alarm buzzerAlarm buzzer (E26033) — An external alarm buzzer is required to hear audible display alarms.

  3. Alarm/analog video in (A80235) — This cable is required to connect the external alarm buzzer to the display. The cable also allows input of an analog video signal, via a BNC connector.

  4. GNSS antennaGA150 GNSS antenna (A80288) — If you intend to use the Axiom® 2 XL’s internal GNSS receiver then an external antenna is required. Alternatively, the display can obtain a position fix from another source of GNSS (GPS) data on the same network.

  5. NMEA 0183 convertorDeviceNet to NMEA 0183 convertor (A80721) — Enables the Axiom® 2 XL to use data provided by external NMEA 0183 devices. The convertor must be connected to the same NMEA 2000 / SeaTalk NG CAN bus network as the Axiom® 2 XL display(s).