Mounting the escutcheon plate

For installations where the transducer cable passes through the transom the supplied escutcheon plate should be used to cover the hole.

Note

After you apply marine grade sealant always allow time for the sealant to fully cure before putting your vessel back in the water.

Escutcheon plate

1. Hold the escutcheon plate in place over the hole in the transom.
2. Mark the location of the escutcheon plate’s mounting holes on the transom.
3. Drill pilot holes in the marked locations.
4. Fill the hole with marine grade sealant.
5. Apply marine grade sealant to the threads of the supplied screws.
6. Insert and tighten screws.