Steer to Heading

In Steer to Heading mode, your autopilot follows a locked heading.

While the Steer to Heading mode is active, the following options and visual indicators shown below will be displayed onscreen.

Each widget can be further customized to suit your preference. If you wish to reset the data page to the default configuration, tap-hold one of the available widgets and select Reset page from the list of widget options shown.

Example: Steer to Heading mode

  1. Steering to Heading — Selecting will allow you to switch your autopilot to another ‘steer to’ mode.

  2. Disengage pilot — Selecting will disengage your autopilot, after confirming a disengage pop-up.

  3. COG indicator — Course Over Ground.

  4. AWD indicator — Apparent Wind Direction.

  5. –1° — Selecting will adjust your locked heading by minus 1 degree.

  6. Locked heading indicator — Locked heading.

  7. TWD indicator — True Wind Direction.

  8. +1° — Selecting will adjust your locked heading by plus 1 degree.

  9. Locked heading value — Locked heading.

  10. Tide indicator — Tide direction.

  11. –10° — Selecting will adjust your locked heading by minus 10 degrees.

  12. +10° — Selecting will adjust your locked heading by plus 10 degrees.

  13. Rudder bar / Wind shift bar (sailing only) — Rudder bar. If your boating activity was set to Sailing during your connected multifunction display / chartplotter’s initial startup wizard, selecting will change between a Rudder bar and a Wind shift bar.