Camera setup and operation via MFD / chartplotter ContentsSetting up the camera via a Raymarine MFDThe CAM300 must be connected to the same network as your multifunction display in order for it to be detected.Camera operation via the Raymarine MFD Video appThe CAM300’s video feed can be viewed by using a connected Raymarine® multifunction display running LightHouse™ 2 and above.Camera operation via the Web interface (LightHouse 4 / LightHouse 3)Raymarine® LightHouse™ 4 (version 4.1.75 or later) and LightHouse™ 3 (version 3.12.217 or later) multifunction displays which are connected to the CAM300 can directly access and change the camera’s Web browser user interface settings by using the Calibrate function.Previous topic: IP address discoveryNext topic: Camera setup and operation via PC / laptop