Autopilot integration ContentsAutopilot controlYour display can be used to control a Raymarine Evolution-Series autopilot. The display can be used as the autopilot’s only controller, or can be used in conjunction with dedicated controllers such as p70-Series controllers.Pilot version keypad LED status (Axiom 2 Pro only)The Pilot version lower keypad on an Axiom 2 Pro display includes an autopilot status LED.Pilot notificationDuring active navigation, when you reach your current destination a notification is displayed.Commissioning — Evolution autopilot systemRudder damping levels and deadband anglesFor autopilot systems which include a rudder angle reference sensor / transducer, rudder damping is used to prevent Evolution-Series autopilot system over-activity, characterized by “hunting” maneuvers. A number of rudder damping levels are available to address this behavior. Rudder damping levels relate to “deadband angles”, and can be configured using your autopilot control head (e.g. p70s/p70Rs or MFD). A higher damping level is intended to eliminate pilot and helm over-activity.Previous topic: Engine integration & autopilot controlNext topic: Trolling motor and anchor integration