Vessel course can be adjusted when the autopilot
is engaged (AUTO mode).
- Use the –1° button, –10° button, or turn the rotary controller counter-clockwise to change
the vessel's course to port.
Pressing the –1° button will increment
the course to port by 1º and –10° will increment
by 10°.
Turning the rotary controller one click counter-clockwise
will increment the course to port by 1° .
- Use the +1° button, +10° button, or turn the rotary controller clockwise to change the vessel's
course to starboard.
Pressing +1° button will increment
the course to starboard by 1º and +10° will increment
by 10°.
Turning the rotary controller one click clockwise will
increment the course to Starboard by 1°.
- Use the –1° and –10° buttons together to perform an Auto Turn to port.
Pressing the buttons together will automatically turn
the vessel to the angle specified in the Auto Turn setting, to port.
- Use the +1° and +10° buttons together to perform an Auto Turn to starboard.
Pressing the buttons together will automatically turn
the vessel to the angle specified in the Auto Turn setting, to starboard.
Example: pressing the -1° button 4
times, or turning the rotary 4 clicks counter-clockwise will result
in a 4° course change to port.
Note By default the Auto Turn angle is set to 90°. The turn angle can be configured
via the Autopilot settings available on a compatible MFD, using the Drive Settings menu: .