Disengaging the autopilot (Standby mode)

The autopilot can be disengaged by following the steps below.
  1. Press Standby.
  2. For Wheel and Tiller drive systems, refer to the instructions below for disengaging the autopilot to return to manual steering.
    • Wheel Pilot: Disengage the wheel drive clutch by rotating the clutch lever counter-clockwise (so that the lever disengages fully from the locating pip (small protruding circle)).
    • Tiller Pilot: Remove the drive unit from the tiller pin. If necessary, extend or retract the pushrod using the -1°, +1°, -10°, or +10° buttons, or the Rotary control.
Important

On wheel drive systems, always ensure that the clutch is fully disengaged before you disembark from the vessel.