Setup menu ContentsSetup menuThe Set-up menu provides settings to configure the unit.Transducer Set-up menuThe Transducer Set-up menu provides access to the calibration settings for the connected transducers. Where a transducer is connected via another device (e.g.: an iTC-5) selecting that device from the list will provide the calibration options for each of the devices connected transducers.iTC-5 calibration settingsSelecting iTC-5 from the Transducer Set-up menu will display a list of transducers that are physically connected to the iTC-5.Depth calibration settingsDepth transducers connected via the iTC-5 or via a legacy transducer pod can be calibrated from the Depth calibration menu.Speed calibration settingsSpeed, and Speed & Temperature transducers connected via the iTC-5 or via a legacy transducer pod, can be calibrated from the Speed calibration menu.Wind calibration settingsWind transducers connected via the iTC-5 or via a legacy transducer pod can be calibrated from the Wind calibration menu.Rudder calibration settingsA Rudder reference transducer connected via the iTC-5 can be calibrated from the Rudder calibration menu.Compass calibration settingsA fluxgate compass connected via the iTC-5 can be calibrated from the Compass calibration menu.RSW-Series wind calibration settingsRSW-Series wind transducers that are connected via SeaTalk NG/NMEA 2000 can be calibrated from the relevant Performance Wind calibration menu.DT800/DT810 calibration settingsDT800/DT810 Depth and Temperature) smart transducers that are connected via SeaTalk NG/NMEA 2000iTC-5 can be calibrated from the DT800/DT810 calibration menu.DST800/DST810 calibration settingsDST800/DST810 Depth, Speed and Temperature) smart transducers that are connected via SeaTalk NG/NMEA 2000iTC-5 can be calibrated from the DST800/DST810 calibration menu.User Preferences menuThe User Preferences menu enables you to customize the settings for your instrument.System set-up menuThe System set-up menu enables users to customize the following user settings:Diagnostics menuYou can access diagnostics details from the Diagnostics menu: Menu > Set-up > Diagnostics.Previous topic: AlarmsNext topic: System checks and troubleshooting