RSW-Series wind calibration settings
RSW-Series wind transducers that are connected via SeaTalk NG/NMEA 2000 can be calibrated from the relevant Performance Wind calibration menu.
RSW transducerCalibration settingsPerformance Wind transducerCalibration settingsThe Performance wind menu enables configuration of RSW-Series wind transducers. The following options are available:
Setting |
Description |
|---|---|
Details |
The details menu displays information about the installed transducer or interface such as serial number and software version etc. |
Adjust Wind Xdcr |
Add an offset value for the RSW-Series transducer. |
Rotating Mast |
Enable and disable calculations for rotating masts. |
Ignore Heading |
Ignore data from the heading sensor. |
Debug Level |
Allows a debug level to be set. This setting should only be used for troubleshooting purposes when directed by Raymarine Technical support. |
For details on configuring an RSW-Series wind transducer, refer to: Configuring RSW wind using i70/i70s instrument display