DT800/DT810 calibration settings
DT800/DT810 Depth and Temperature) smart transducers that are connected via SeaTalk NG/NMEA 2000iTC-5 can be calibrated from the DT800/DT810 calibration menu.
Depth and temperature transducerCalibration settingsThe following calibration options are available:
Setting |
Description |
|---|---|
Details |
The details menu displays information about the installed transducer or interface such as serial number and software version etc. |
Depth offset |
The depth offset menu allows you to configure the location depth readings are taken from and specify the distance the location is from the transducer face. For Depth calibration details refer to: Depth calibration |
Temperature offset |
Enter a temperature offset so that the displayed reading matches manually taken water temperature. For water Temperature calibration details refer to: Calibrating Water temperature |