Performing a network settings reset

If you have lost or can no longer remember the router’s admin password you can perform a networking reset following the steps below.

Note

Performing a networking reset will revert all customized Wi-Fi and Ethernet settings and the admin password to their factory default settings. All other settings will remain unchanged.

With the router powered on:

  1. Insert a paper clip or a small screwdriver into the hard reset hole located on the bottom right of the router.
  2. Press in and hold for approximately 2 seconds until the first 5 LEDs turn off and then blink green once simultaneously.
  3. Remove the paperclip / screwdriver.

During the reset process the first 5 LEDs will turn solid amber. Once the Power LED turn solid green the networking reset is complete.