Advanced settings ContentsLAN set-upEthernet configuration pageThe Ethernet configuration page provides IP address details and configuration settings for the router’s wired network connections.Configuring a wired internet connectionThe router can connect to the internet using a wired connection to a Wide Area Network (WAN), such as a broadband satellite internet system or a hard-wired marina internet connection.Wi-Fi configuration pageThe Wi-Fi configuration page provides IP address details and configuration settings for the router’s Wi-Fi access point connection.IPv6 pageIPv6 settings can be configured from the IPv6 page.GNSS pageThe GNSS page provides settings and information for the router’s internal GNSS (GPS) receiver.Inputs and outputsSettings and status pages are available for the management of devices connected to the router’s inputs and outputs.Alert notifications pageAlert notifications can be configured for the router’s supply voltage and input channel voltage.Power management pageThe router has 2 power modes: Always on, and Low power (sleep). In low power (sleep) mode, the router’s power consumption is reduced. The router can be woken from low power mode when certain conditions are met.Performing a router software upgradeRaymarine® regularly issues software updates for its products which provide new and enhanced features and improved performance and usability. It is important to ensure that you have the latest software for your products by regularly checking the Raymarine® website for new software releases.Restart & factory resetIf you encounter problems with your router it can be restarted or reset to its factory default settings from the Restart & factory reset page.Performing a factory reset to restore default settingsFollow the steps below if you need to reset the router to its factory default settings, but want to re-connect it to the same Raymarine cloud account.Performing a factory reset prior to disposal / change of ownership or accountIn the event that you need to dispose of your router or sell it, and your router has been linked to your Raymarine cloud account, it must first be removed from your account and then restored to its factory default settings.Changing the admin passwordThe default password used to access the router’s web interface can be changed.Parent topic: Web interface (settings)Previous topic: Connected devices pageNext topic: Help