Accessing the web interface using a wired connection

The router’s settings are accessed using the built-in web interface. The web interface can be accessed using a wired connection to a PC or laptop.

Important

Ensure that your PC/laptop is configured to be assigned an IP address automatically (via DHCP).

  1. Ensure that the router’s power connection has been wired to a suitably-rated power supply in accordance with the information provided in the Power Connection section:Power connection
  2. Connect the RayNet end of the supplied RayNet to RJ45 cable to one of the router’s network ports.
  3. Connect the RJ45 end of the RayNet to RJ45 cable to your PC/laptop.
  4. Switch on the router’s power supply.
  5. Wait for the router to start up and for your PC/laptop’s network connection to be established.
  6. Launch the PC/laptop’s web browser, enter ‘http://yachtsense.raymarine.com’ into the address bar, and then press Enter/Return.
    Note

    Supported browsers — The web interface can be accessed using the following supported browsers: Chrome, Firefox, Edge and Safari. Internet Explorer (IE) is NOT supported.

The status page is displayed. You can now use the Menu displayed on the left to navigate the web interface and change the router’s settings, as required.