Enabling MVA via the camera’s Web interface

You can enable MVA using the camera’s Web interface.

  1. Log-in to the camera’s Web interface.
    Note

    For more information on how to log-in, refer to:

  2. From the menu on the left, select Video Analytics.
  3. From the drop-down menu displayed below Enable, select the payload you want Object Detection enabled for: Visible, Thermal or Both.
    Note

    Payload choice is dependent on camera model.

From the Video Analytics menu you can adjust the Object Detection feature settings:

  • Payload — select which payload to adjust settings for:

    • Visible

    • Thermal

  • Threshold — adjusting the threshold value will increase or decrease the camera payload’s sensitivity for detecting objects:

    • 1 is the lowest threshold and will show all small and distant detected objects.

    • 16 is the maximum threshold and will only show prominent objects detected by the camera.

  • Environment — select the environment you are using object detection in:

    • Coastal has more filtering to reduce false detections of land.

    • Open sea has less filtering, so may identify land as an object.