Parts required (trunnion mount installations)
The following parts are required to mount the display on a trunnion bracket.
InstallationTrunnion mountingParts requiredMountingTrunnion mountingParts required
Part |
Axiom 2 7" |
Axiom 2 9" / 12" |
|---|---|---|
Trunnion adaptor |
• |
|
Trunnion bracket |
• |
• |
(1) Self-tapping screws (or other appropriate fixings) |
• |
• |
(1) Fixings for trunnion mounting are NOT supplied, as the requirements will vary:
Axiom 2 7" display: Requires 4x fixings, which must be suitable for the mounting surface material and the 4.20 mm (0.17 in) diameter trunnion bracket mounting holes.
Axiom 2 9" / 12" display: Requires 5x fixings, which must be suitable for the mounting surface material and the 5.75 mm (0.23 in) diameter trunnion bracket mounting holes.
If you wish to trunnion mount your display and the required parts are NOT supplied with your product, refer to the following section: