Axiom XL vs Axiom 2 XL video connections

When comparing Axiom XL to Axiom 2 XL displays, the primary and secondary video feeds are inverted.

Video connectionsNetwork streamOn Axiom XL displays:

  • The primary video feed VIDEO 1 is streamed over Ethernet, and the connections for it are on the Alarm / Video cable.

  • The secondary video feed VIDEO 2 is NOT streamed over Ethernet, is shared with the HDMI IN connection, and the connections for it are on the Power / Data / Video cable.

On Axiom 2 XL displays:

  • The primary video feed VIDEO 2 is streamed over Ethernet, and the connections for it are on the Power / Data / Video cable.

  • The secondary video feed VIDEO 1 is NOT streamed over Ethernet, is shared with the HDMI IN connection, and the connections for it are on the Alarm / Video cable.

Note

  • When swapping out an older Axiom XL display with an Axiom 2 XL display, you will need to change your video cable connections if you had a video source connected to the Axiom XL display that was being streamed to other networked displays. Disconnect the video device connected to the Axiom XL's VIDEO 1 connection (i.e. via the Alarm / Video cable), and connect this video device to the Axiom 2 XL’s VIDEO 2 connection (i.e. via the Power / Data / Audio cable).

  • The original Axiom XL Power / Video / NMEA 0183 cables cannot be used with Axiom 2 XL displays.