Disinfecting the display

In installations where MFDs / chartplotters have multiple users (e.g.: on charter boats), the touchscreen and control buttons should be disinfected. Use a 70% isopropyl alcohol wipe to disinfect the display.

Important

  • If wipes are unavailable, spray 70% isopropyl alcohol onto a lint-free cloth (such as a microfibre cloth), and wipe the display. Do NOT spray directly onto the touchscreen.

  • Do NOT use a stronger concentration of alcohol, as this could strip the protective coating on your screen.

  • Do NOT use an abrasive cloth or abrasive cleaning fluid to clean the screen, as this will degrade the protective coating and potentially scratch the screen.

  1. Switch off the power to the display.
  2. Follow the instructions for cleaning your display screen.
  3. Using a 70% isopropyl alcohol wipe, gently wipe all surfaces and control buttons.
  4. Using a second 70% isopropyl alcohol wipe, very gently clean the surface of the touchscreen.
  5. Rinse the screen with fresh, clean water to remove all traces of the chemicals used in the wipe.
  6. Allow the screen to dry naturally.
  7. If any smears remain, very gently wipe the screen with a clean, microfibre cloth.