Optional additional components

The following optional products and devices can be used with or connected to your display.

Optional productsAdditional components

  • MicroSD memory / electronic cartography card — Inserting a compatible memory card into the card reader enables:

    • display of compatible electronic cartography.

    • collection and display of Realbathy™ personal sonar data.

    • Back up and restore of user data and settings.

    • saving screenshot image files.

  • EV-1 Heading sensor (E70096) — Connecting the display to a NMEA 2000 / SeaTalkng® backbone that includes an EV-1 enables vessel heading data to be available, regardless of vessel movement.

  • Quantum™ radar scanner (E70344, E70210 and E70498) — Connecting the display to a compatible radar scanner using Wi-Fi enables use of the Radar app.

  • Evolution™ autopilot system — Connecting the display to the same network as an Evolution autopilot system enables navigation data to be sent to a compatible autopilot controller. For further information on compatible autopilot controllers, refer to: Compatible autopilot controllers

  • ECI-100 (E70227) — Connecting the display to a NMEA 2000 / SeaTalkng® backbone that includes an ECI-100 enables display of compatible engine data. For further information on compatible engines refer to: Compatible engine systems

  • Third-party tank level sensors — Connecting the display to a NMEA 2000 or SeaTalkng® backbone that includes standard third-party NMEA 2000 tank level sensors enables the display of tank level sensor data . For further details on tank level sensors refer to: Compatible tank level sensors

  • VHF radio — Connecting the display to a NMEA 2000 or SeaTalkng® backbone can provide position data to a compatible VHF radio.

  • RS150 GNSS receiver (E70310) — Connecting an external GNSS / GPS receiver can provide more accurate position tracking.

  • AIS700 / AIS650 / AIS350 (E70476 / E32158 / E32157) — Connecting compatible AIS hardware allows AIS targets to be tracked in the chart app.

  • iTC-5 (E70010) — Connecting the display to a NMEA 2000 / SeaTalkng® backbone that includes analog transducers connected via an iTC-5 enables the display of transducer sensor data (depth, speed, wind, water temperature etc.) )in databoxes and the dashboard app.

    Refer to the iTC-5 installation instructions (87138) for further information on connecting analog transducers via an iTC-5.

    Note

    Transducer calibration is not supported by the display and must be performed on an appropriate SeaTalkng® instrument display such as the i70S multifunction instrument display.

  • Airmar NMEA 2000 smart sensors — Connecting an Airmar smart sensor such as a DST800 or P79.