Software updates

Raymarine regularly issues software updates for its products, which provide new and enhanced features and improved performance and usability. It’s important to ensure that you have the latest software for your products by regularly checking the Raymarine website for new software releases.

To check for the latest software updates and the software update procedure for your specific product(s), refer to: www.bit.ly/rym-software

Software updatesUpgrading, software Unless otherwise stated, software updates for Raymarine products are performed using a Raymarine MFD / chartplotter.

  • Where applicable, you should always backup your user data and settings before performing a software update.

  • To update SeaTalk NG products, you must use the datamaster MFD / chartplotter which is physically connected to the SeaTalk NG backbone.

  • Ethernet (RayNet) products can be updated from any MFD / chartplotter on the same network as the product to be updated.

  • In order to perform a software update, any connected Autopilot or Radar must be switched to Standby.

  • The MFD / chartplotter “Check online” feature is only available when connected to the Internet.

Note

If in doubt as to the correct procedure for updating your product software, refer to your dealer or Raymarine technical support.