Follow the steps below to release the product from the
mounting bracket.
InstallationBracket releaseDisassemblyBracket
release
- Insert the end of a small flat blade screwdriver (or similar
tool) into the release hole located on the flat edge of the mounting
bracket. Twist the screwdriver 90°, so that there is a small gap between
the mounting trim and mounting tray.
Important To help prevent scratching the product,
cover the tip of your screwdriver with a small piece of insulation
tape.
- With the screwdriver in place, twist the mounting trim
counter-clockwise approximately 10°, and then lift away from the product.
