Auto-route troubleshooting

For successful automatic route generation there are certain pre-requisites that must be met.

Auto-routeTroubleshootingIf generating an auto route fails check the following:

• Ensure that your cartography supports auto routing.

• Check with your cartography vendor, if an active subscription is required.

• Check you have the latest updates for your cartography.

• Ensure that you have correctly configured your minimum safe distances: Min safe depth and Min safe height.

• Ensure that your vessel’s current position (GPS) is valid. You cannot generate an auto route if your current position conflicts with your minimum safe distances.

• Ensure that your selected destination does not conflict with your minimum safe distances. You cannot generate an auto route if the desired destination conflicts with your minimum safe distances.

• Ensure that navigation to the desired destination is possible.

• The resulting route should be less than 100 nautical miles in length.

• The resulting route should contain less than 250 waypoints.

• Ensure that your chartplotter has the latest version of LightHouse.