Unsupported modes

The following autopilot modes are not supported by the Alpha-Series performance display:

• Pilot: PATTERN mode.

• Pilot: JOG STEER mode.

• Pilot: CALIBRATION mode.

• Pilot: SMART STEER mode.

• Pilot: FAULT mode.

• Pilot: POWER STEER mode.

• Pilot: STARTING mode.

If an unsupported mode is initiated via an external controller, the performance display will indicate that the mode is active via the Pilot: STANDBY page layout:

1. Pilot: xxx — Selecting will allow you to switch your autopilot to another ‘steer to’ mode.