Calibration of STW on a DST810 transducer requires an on-water
sea trial.
Calibration STWDST810For best
results avoid strong or variable currents.
From the Speed calibration
options menu:
- Select Automatic calibration from the
speed calibration menu.
- Select Start calibration.
The Recording calibration notification is displayed.
If calibration has already been performed you will be prompted to
overwrite the calibration data.
- Sail the boat close hauled upwind for 2 minutes.
- Tack and Sail upwind for 2 minutes.
- Bear away and sail downwind for 2 minutes.
- Gybe and sail for 2 minutes.
- Select the Finished button.
You can Pause / Resume the calibration using the relevant buttons.
You can cancel
the calibration at any time, by selecting the Cancel button.
