Layline data requirements

The requirements for displaying laylines are as follows:

Laylinessystem requirements

  • The MFD’s Activity must be set to Sailing. Boat activity is set during the MFD’s initial startup wizard. If your MFD is not currently using the sailing activity then a factory reset is required to change activity to Sailing.

  • The following sensor data must be available:

    • Wind data

    • Speed Through Water (STW)

    • GNSS data (COG, SOG, position)

    • Heading

  • Display of laylines must also be enabled from either the Chart app Laylines settings menu: Menu > Settings > Laylines > Display laylines on this chart or from the Laylines vessel popover menu option.