Dual range
Cyclone, Magnum, HD and SuperHD™ radar scanners are capable of Dual range. Dual range enables you to view 2 ranges (i.e. short range and long range) simultaneously.
RadarDual rangeTo view both ranges you will need to configure a splitscreen, dual radar, app page that displays the same Radar scanner in each window. You can then enable Dual Range mode and set the Channel for each window from the Transmission tab: .
The following dual range limitations do not apply to Cyclone radar scanners.
Dual range limitations:
Dual range cannot be enabled when radar targets are being tracked (clear the target list and try again).
When dual range is enabled manual and automatic radar target acquisition is disabled
In dual range the maximum rotation speed is 24rpm.
When using a Magnum or SuperHD™ open array radar scanner Antenna boost and Power boost controls are only applied to the long range channel.
Open array radar scanners running version 1.xx or 2.xx software will have the short range channel’s maximum range restricted to 3 nm.
When dual range is enabled on a radar scanner running version 1.xx or 2.xx software the Expansion control will be disabled.