Data troubleshooting

Instrument, engine or other system data is unavailable at all displays

Possible causes

Possible solutions

Data is not being received at the display(s):

  • Check transmitted data is compatible with your display. Refer to the supported PGN list.

  • Check the data bus (e.g. SeaTalk NG) wiring and connections.

Data source (e.g. instrument display or engine interface) is not operating:

  • Check the source of the missing data (e.g. instrument display or engine interface).

  • Check power to the data bus (e.g. SeaTalk NG).

Software mismatch between equipment may prevent communication:

  • Ensure that all Raymarine products are running the latest available software; check the website for the latest versions and software compatibility information: www.raymarine.com/software

Instrument or other system data is missing from some but not all displays

Possible causes

Possible solutions

Network connection problem:

  • Check that all required equipment is connected to the same network.

  • Check correct operation of network switch, if used.

  • Check network cabling is correct and free from damage.

Software mismatch between equipment may prevent communication:

Check all MFDs / chartplotters are using the same version of software.