Setting the Compass Offset

You can manually apply an offset to the compass heading by following the steps below.
CompassOffsetTo apply an offset you require a source of heading such as the ship’s compass.
From the Transducer Set-up menu: Menu > Set-up > Transducer Set-up
  1. Ensure that the Rudder is centred.
  2. Select iTC-5.
    A list of available transducers is displayed.
  3. Select Compass.
  4. Select Compass Offset.
  5. Steer your vessel on a steady course.
  6. Use the Up and Down buttons to adjust the compass offset until the displayed heading matches the heading of the ship’s compass.
  7. Select Save.