Existing Calibration points can be edited.
CalibrationSpeedSpeed calibrationEditing calibration pointsFrom the Advanced menu:
- Select Adjust cal table.
- Select Start.
- Highlight the relevant Calibration point from the table.
- Select Options.
- Select Edit cal point.
The Calibration point adjustment page is displayed.
- Use the Up and Down buttons to adjust the Calibration point for the selected speed to
match your new Calibration speed.
- Select Done to return to the Calibration
table.
- Repeat steps 4 to 7 for all Calibration points that require
adjustment.
- Select Finish when all of the required
Calibration points have been adjusted.