Mounting the YachtSense Link router
Follow the instructions below to mount the router.
Before mounting the product ensure that you have:
selected a suitable location, based on the location requirements found in this document.
identified the relevant cable connections and the route that the cables will take.
- Fix the supplied mounting template to the chosen location using masking or self-adhesive tape.
- Drill 4 holes as indicated on the template to accept the fixings.
- Remove the mounting template.
- Screw the fixings approximately half way into the holes in the mounting surface.
- Place the unit over the fixing screws and push down to engage the keyhole slots.
- Fully tighten the screws.