Connecting cables

Follow the steps below to connect the cable(s) to your product.

Connecting cables

  1. Ensure that the vessel's power supply is switched off.
  2. Ensure that the device being connected has been installed in accordance with the installation instructions supplied with that device.
  3. Ensuring correct orientation, push cable connectors fully onto the corresponding connectors.
  4. Engage any locking mechanism to ensure a secure connection (e.g.: turn locking collars clockwise until tight, or in the locked position).
  5. Ensure any bare ended wire connections are suitably insulated to prevent shorting and corrosion due to water ingress.