YachtSense DCS-Series Digital Control System troubleshooting

Error messages

TroubleshootingNo modules detected message displayed

The Master or Remote module cannot detect the other modules in the system.

1. Power down the system.

2. Check the condition of the Master system or Remote system that is displaying the message. Ensure that all modules are connected securely and are free from damage.

3. Damaged modules must be replaced before using the system again.

4. Power on the system.

5. If problem persists, contact YachtSense DCS-Series technical support for assistance.

Channel not configured message displayed.

The channel is not configured

1. If the channel was previously working try power cycling the system.

2. If problem persists, contact YachtSense DCS-Series technical support for assistance.

Unit overheated message displayed.

The unit has exceeded it normal operating temperature range.

1. Ensure system has adequate ventilation.

2. Check connected devices and ensure correct operation.

3. If problem persists, contact YachtSense DCS-Series technical support for assistance.