Radar app controls

The Radar app has 2 control modes, motion mode and cursor mode. The behavior of some controls are dependent upon control mode.

Motion mode

Radar appMotion modeMotion mode is the default mode when the Radar app is opened. In motion mode the cursor is not displayed onscreen.

Controls behavior:

  • Pressing the OK button opens the sensitivity controls.Radar appSensitivity controls

  • Pressing any button on the Directional pad will switch to Cursor mode.

  • Pressing the Waypoint button will place a waypoint at your vessel’s current location.Radar appPlacing waypointWaypointPlacement

  • Radar appRangePressing the Plus or Minus buttons will range in and range out respectively, centered around your vessel .

Cursor mode

Radar appCursor mode In cursor mode the cursor can be used to select objects onscreen.

Controls behavior:

  • Pressing the OK button opens the context menu for the area or object directly under the cursor’s position.Radar appContext menu

  • Radar appPanningPressing any button on the Directional pad moves the cursor in the respective direction.

  • Pressing the Waypoint button will place a waypoint at your vessel’s current location.Radar appPlacing waypointWaypointPlacement

  • Radar appRangePressing the Plus or Minus buttons will range in and range out respectively.

  • Radar appMotion modePressing the Back button will switch back to Motion mode.

Note

Waypoints are not shown in the Radar app.