AIS vectors
Vectors can be displayed for AIS targets.
AISVectorsVectorsAIS target vectors settings can be accessed from the Target Settings tab: .
The length of the vector indicates the predicted position of the target after the time interval specified in Vectors period has passed. Adjusting the Vectors period option will adjust the length of the vector.
AIS vectors can be enabled and disabled using the AIS vectors toggle switch.
Target vectors can be enabled and disabled for individual targets: Press and hold on an AIS target to display the context menu, and then select Vector.
The vectors can be set to True or Relative.
 |
True vectors In true mode the vectors are shown ground referenced (i.e.: their actual path over ground). |
 |
Relative vectors In relative mode the vectors are shown relative to your vessel’s position. |