You can configure the camera to account for a
unit that is installed “ball down” (upside down), that is, with the
base fixings positioned above the camera lens. For ball-down
(upside down) installations, the thermal image presented on displays
is rotated 180 degrees, and pan and tilt controls are modified to
account for the inverted camera.
To configure ball-down (upside down) mode:
- From the camera’s Web interface, click Configuration on the top menu.
The Configuration page is displayed.
- From the left-hand panel, click Devices.
The PT submenu is selected, and
the PLAT panel is displayed.
- From the Upside Down list, select Yes.
- Click Save to confirm the change.
An information dialog confirms that the changes have
been saved correctly.
- Click Accept in the information dialog.
A message in the page footer indicates that you need
to restart the camera server before the changes will be effective.
- To stop the server, click the green icon on the left side
of the page footer.
An information dialog confirms that the server has
stopped.
- Click Accept in the information dialog.
- To restart the server, click the black icon on the left
side of the page footer.
An information dialog confirms that the server is now
running.
- Click Accept in the information dialog.
The black icon reverts to green, and the camera is
now configured for ball-down (upside down) operation.