Power connections ContentsPower optionsThis product must be powered using ONE of the following methods.Direct power connectionThe performance display can be powered directly from a 12 V or 24 V power source by using a separately available RayNet and bare end power wires accessory cable.Inline fuse and thermal breaker ratingsThe performance display’s power cable is fitted with a waterproof fuse holder and an 8 A inline fuse, which is appropriate for up to 3 additional daisy-chained displays. In the instance where the supplied inline fuse needs to be replaced, or when installing a thermal breaker, please observe the following inline fuse and thermal breaker ratings:Power distributionRecommendations and best practice for the power connection of products supplied with a drain wire as part of the supplied power cable.Power cable extension (12 / 24 V systems)If you need to extend the length of the power cable supplied with your product, ensure you observe the following advice:Power cable drain wire connectionThe power cable supplied with this product includes a dedicated drain wire for connection to a vessel's Radio Frequency (RF) ground point (if available), or the negative battery terminal.Multiple performance display connectionsMultiple performance displays can be connected together (daisy-chained) for the purpose of an expanded system, via a separately available 8-pin right-angled daisy-chain accessory cable. A maximum of 4 performance displays can be daisy-chained in a series and a maximum of 10 performance displays can be connected per system.Previous topic: Network connectionsNext topic: System checks